From: Antonio Soares (amsoares@netcabo.pt)
Date: Fri Jun 22 2007 - 07:36:21 ART
It will work, i assure you that. The router will try several encaps then
uses Bootp to get an IP address. After that, it will request its config via
tftp.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Bhaskar Sivanesan
Sent: sexta-feira, 22 de Junho de 2007 10:38
To: ccie forum
Subject: Reg. autoinstall
HI all
A query regarding autoinstall over FR WAN connections.
When there is no config in the NVRAM, the default config in a serial
interface would be HDLC. So how does the router communicate over the FR
network to get its config from a remote TFTP server.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cg/hcf_c/
ch15/cfhanstl.htm#wp1199668 is the link that speaks about the autoinstall
procedure. But am not getting how the router speaks Frame-relay without any
configuration.
Thanks
Bhaskar
---------------------------------
Sucker-punch spam with award-winning protection.
Try the free Yahoo! Mail Beta.
This archive was generated by hypermail 2.1.4 : Sun Jul 01 2007 - 17:24:50 ART