Anycast-RP + AutoRP

From: CCIE GOAL (ccie.goal@gmail.com)
Date: Tue Jun 12 2007 - 19:22:23 ART

• Next message: CCIE GOAL: "Re: PREFIX-LIST Interpretation"
• Previous message: Ronnie Angello: "Re: OSPF router id and BGP router id"
• Next in thread: Marko Milivojevic: "Re: Anycast-RP + AutoRP"
• Maybe reply: Marko Milivojevic: "Re: Anycast-RP + AutoRP"
• Maybe reply: Scott Morris: "RE: Anycast-RP + AutoRP"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi group,

I was playing a little with multicast and a doubt came up regarding anycast...

I saw that anycast is able to load-balance... the source joins the
nearest RP....

But is there any option to force the RP to always be the same router,
and only if there is some problem with this RP router the msdp peer
should take over?

I know that it is possible without Anycast.
But I would like to know on a "Anycast + Auto-RP" scenario...

Thanks in advance!
Luciano

• Next message: CCIE GOAL: "Re: PREFIX-LIST Interpretation"
• Previous message: Ronnie Angello: "Re: OSPF router id and BGP router id"
• Next in thread: Marko Milivojevic: "Re: Anycast-RP + AutoRP"
• Maybe reply: Marko Milivojevic: "Re: Anycast-RP + AutoRP"
• Maybe reply: Scott Morris: "RE: Anycast-RP + AutoRP"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sun Jul 01 2007 - 17:24:48 ART