frame-relay physical interface status

From: Ovidiu Neghina (o.neghina@gmail.com)
Date: Thu May 24 2007 - 04:53:12 ART

• Next message: CCIE 19999: "PPP authentication"
• Previous message: Ivan: "Re: PIM NBMA MODE"
• Next in thread: Edison Ortiz: "Re: frame-relay physical interface status"
• Maybe reply: Edison Ortiz: "Re: frame-relay physical interface status"
• Maybe reply: Mohammad Saeed: "Re: frame-relay physical interface status"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi dear all,
What is the correct behaviour...I have a serial interface on a router that
is still up even if all the dlci are inactive.
Should't the line protocol be down ?

R1#sh int ser 0/1/0
Serial0/1/0 is up, line protocol is up
  Hardware is GT96K Serial
  Internet address is 155.1.0.1/24
  MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
     reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation FRAME-RELAY, loopback not set

R1#sh fram pvc | i Serial
PVC Statistics for interface Serial0/1/0 (Frame Relay DTE)
DLCI = 102, DLCI USAGE = UNUSED, PVC STATUS = INACTIVE, INTERFACE =
Serial0/1/0
DLCI = 103, DLCI USAGE = UNUSED, PVC STATUS = INACTIVE, INTERFACE =
Serial0/1/0
DLCI = 104, DLCI USAGE = LOCAL, PVC STATUS = INACTIVE, INTERFACE =
Serial0/1/0
DLCI = 105, DLCI USAGE = LOCAL, PVC STATUS = INACTIVE, INTERFACE =
Serial0/1/0
DLCI = 113, DLCI USAGE = UNUSED, PVC STATUS = INACTIVE, INTERFACE =
Serial0/1/0
R1#

Thank you
Ovidiu

• Next message: CCIE 19999: "PPP authentication"
• Previous message: Ivan: "Re: PIM NBMA MODE"
• Next in thread: Edison Ortiz: "Re: frame-relay physical interface status"
• Maybe reply: Edison Ortiz: "Re: frame-relay physical interface status"
• Maybe reply: Mohammad Saeed: "Re: frame-relay physical interface status"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Jun 01 2007 - 06:55:22 ART