From: Scott Morris (smorris@ipexpert.com)
Date: Tue May 01 2007 - 12:02:44 ART
It won't setup a session with the web-cache device if you don't change the
SDM. I would assume that this means you would also not get your points on
the exam unless you did this.
HTH,
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, JNCIE
#153, CISSP, et al.
CCSI/JNCI-M/JNCI-J
IPexpert VP - Curriculum Development
IPexpert Sr. Technical Instructor
smorris@ipexpert.com
http://www.ipexpert.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of John
Gibson
Sent: Tuesday, May 01, 2007 10:34 AM
To: ccielab@groupstudy.com
Subject: WCCP needs an SDM template command?
I just wonder if any one is doing this,
univercd says
"You must use the extended-match keyword to support 144-bit Layer 3 TCAM
when WCCP or multi-VRF CE is enabled on the switch."
WCCP commands are accepted even when the extended-match keyword is never
used.
But we don't have a WCCP device to verify if our WCCP configuration command
in the switch works as expected.
This archive was generated by hypermail 2.1.4 : Fri Jun 01 2007 - 06:55:19 ART