WCCP needs an SDM template command?

From: John Gibson (johngibson1541@yahoo.com)
Date: Tue May 01 2007 - 11:34:07 ART

• Next message: Hossam Abbas: "Re: Match JPG"
• Previous message: John Jones: "Re: Tags in redistribution"
• Next in thread: Scott Morris: "RE: WCCP needs an SDM template command?"
• Maybe reply: Scott Morris: "RE: WCCP needs an SDM template command?"
• Maybe reply: Ronnie Angello: "Re: WCCP needs an SDM template command?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

I just wonder if any one is doing this,

univercd says

"You must use the extended-match keyword to support
144-bit Layer 3 TCAM when WCCP or multi-VRF CE is
enabled on the switch."

WCCP commands are accepted even when the
extended-match
keyword is never used.

But we don't have a WCCP device to verify if our WCCP
configuration command in the switch works as expected.

• Next message: Hossam Abbas: "Re: Match JPG"
• Previous message: John Jones: "Re: Tags in redistribution"
• Next in thread: Scott Morris: "RE: WCCP needs an SDM template command?"
• Maybe reply: Scott Morris: "RE: WCCP needs an SDM template command?"
• Maybe reply: Ronnie Angello: "Re: WCCP needs an SDM template command?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Jun 01 2007 - 06:55:19 ART