From: Hossam Abbas (habbas97@yahoo.com)
Date: Wed Mar 21 2007 - 20:13:52 ART
Hi,
i have frame relay hub and spokes l2 connectivity, with multicast auto-rp pim spars-mode
i did everything,
ip pim autorp listener
ip pim nbma-mode on th hub router
but when i issue the command
Rack1R2#sh ip mroute
IP Multicast Routing Table
Flags: D - Dense, S - Sparse, B - Bidir Group, s - SSM Group, C - Connected,
L - Local, P - Pruned, R - RP-bit set, F - Register flag,
T - SPT-bit set, J - Join SPT, M - MSDP created entry,
X - Proxy Join Timer Running, A - Candidate for MSDP Advertisement,
U - URD, I - Received Source Specific Host Report, Z - Multicast Tunnel
Y - Joined MDT-data group, y - Sending to MDT-data group
Outgoing interface flags: H - Hardware switched
Timers: Uptime/Expires
Interface state: Interface, Next-Hop or VCD, State/Mode
(*, 224.0.1.39), 00:46:53/stopped, RP 0.0.0.0, flags: DP
Incoming interface: Null, RPF nbr 0.0.0.0
Outgoing interface list: Null
(150.1.2.2, 224.0.1.39), 00:41:37/00:02:23, flags: PT
Incoming interface: Loopback0, RPF nbr 0.0.0.0
Outgoing interface list: Null
(150.1.5.5, 224.0.1.39), 00:27:41/00:02:26, flags: PT
Incoming interface: Tunnel1, RPF nbr 141.1.25.5
Outgoing interface list: Null
(*, 224.0.1.40), 00:58:33/stopped, RP 0.0.0.0, flags: DPL
Incoming interface: Null, RPF nbr 0.0.0.0
Outgoing interface list: Null
(150.1.8.8, 224.0.1.40), 00:40:34/00:02:15, flags: PLT
Incoming interface: FastEthernet0/0, RPF nbr 141.1.0.8
Outgoing interface list: Null
The outgoing interface list is null, and i can't ping any group,
could any1 help me in troubleshooting this issue
thanks
This archive was generated by hypermail 2.1.4 : Sun Apr 01 2007 - 06:35:52 ART