Re: IEWB Lab 3 task 2.1

From: A.G. Ananth Sarma (GMail) (ananth.sarma@gmail.com)
Date: Wed Mar 21 2007 - 20:43:17 ART

Hi Shine,

I remeber doing this lab 2 months back and was fighting with my instructor
in the same line as you. I will try my best to explain your question.

The task says no dynamic mapping so "No Frame-relay inverse Arp".
Also, it says to use physical interfaces ONLY for R2 and R4. You can use
sub-interfaces on R5.

Not to forget the broadcast key word on all routers and multipoint keyword
on R5 subinterface.

Though you do not have full reachability at this point, still you can test
it indirectly between R4 and R2 by source routing (extending PINGing) via
R5. When asked for the source route, use R5's IP address.

HTH,

Ananth

On 3/22/07, Shine <shinejoseph@iprimus.com.au> wrote:
>
> Hi GS,
>
> I am not sure if this is the right place for asking this question!
>
> currently I am working on the IEWB ver3.0 Vol1 Lab 3 Task 2.1. I do not
> have
> the full reachablity between all the three routers in the frame-relay. The
> task asks not to use dynamic mapping and to use physical interfaces.
>
> Can someone explain this in simple terms?
>
> TIA,
> Shine
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
> 

-- 
Regards,

A.G. Ananthasubramania Sarma

Tel:  (00971) 2 6315826 (R)
Mob: (00971)50-6115913/8120527

Email:
ananth.sarma@gmail.com
agsarma@eim.ae

This archive was generated by hypermail 2.1.4 : Sun Apr 01 2007 - 06:35:52 ART