From: ccie_sp@hotmail.com
Date: Wed Mar 07 2007 - 07:56:19 ART
Hi,
ROUTER1-s1/0--------s1/0--ROUTER2
ROUTER1-s1/1--------s1/1--ROUTER2
Between the S1/0 interfaces I've setup L1/L2 adjacency.
Between the S1/1 interfaces I've setup L2 adjacency.
I'm advertising R1 and R2 loopbacks via "passive interface"
The ISIS COST on the S1/1 links (both directions) are set to 1 (so L2 is less
cost then L1 links, since that's using 10 = default).
Still the path is traveling between the S1/0 interfaces, since L1 is preferred
over L2.
What I want to accomplish is that isis prefers L2 prefixes over L1 if the
metric is less then the L1 path, is that possible, or is this NOT POSSIBLE
Thanks.
This archive was generated by hypermail 2.1.4 : Sun Apr 01 2007 - 06:35:50 ART