From: kenza@kenza.nl
Date: Wed Mar 07 2007 - 08:01:30 ART
Other solution is also suitable is configuring MLPPP
interface ATMX/0. point-to-point
description (MLPPP the 1st line)
pvc xx/xxx
cbr <PCR>
encapsulation aal5mux ppp Virtual-Template2
!
interface ATMX/0 point-to-point
description (MLPPP the 2nd line)
pvc xx/xxx
cbr <PCR>
encapsulation aal5mux ppp Virtual-Template2
and so on for 3rd and 4th line
PPP Multilink must be enabled on the Virtual-Template interface:
interface Virtual-Template2
no ip address
no ip redirects
no ip proxy-arp
no peer default ip address
ppp authentication pap
ppp multilink
ppp multilink fragment disable
#show ppp multilink
Note: check out the release software for your router
goodluck
----- Original Message -----
From: "Muhammad Saleem" <msaleems@gmail.com>
To: <ccielab@groupstudy.com>
Sent: Wednesday, March 07, 2007 11:09 AM
Subject: combine 4 DSL connections into one CISCO
> Hi Everyone,
>
>
>
> How can I combine 4 DSL connections into one CISCO router and get combined
> bandwidth, like each DSL line is giving me 1mb download so at my end I want
> to use one router with four ADSL WICs and I should be able get 4mb combined
> download.
>
>
>
> I will appreciate urgent reply
>
>
>
> Many thanks
>
>
>
> Muhammad Saleem
>
> Networks Manager
>
> Saudi Arabia
>
> 00966-508205722
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
Disclaimer
************************************************************************
Aan dit bericht kunnen geen rechten worden ontleend. Dit bericht is
uitsluitend bestemd voor de geadresseerde. Als u dit bericht per abuis
hebt ontvangen, wordt u verzocht het te vernietigen en de afzender te
informeren. Wij adviseren u om bij twijfel over de juistheid of de
volledigheid van de mail contact met afzender op te nemen.
This message shall not constitute any rights or obligations.
This message is intended solely for the addressee.
If you have received this message in error, please delete it and
notify the sender immediately. When in doubt whether this message
is correct or complete, please contact the sender.
************************************************************************
This archive was generated by hypermail 2.1.4 : Sun Apr 01 2007 - 06:35:50 ART