From: kenza@kenza.nl
Date: Wed Mar 07 2007 - 07:53:28 ART
You can enable CEF on the ce-router to load-balance traffic, per packet,
across multiple physical interfaces.
then configure interfaces
interface ATM1/1.10001 point-to-point
ip unnumbered eth0
ip load-sharing per-packet
pvc x/xx
cbr xxx
oam-pvc manage
interface ATM1/2.10002 point-to-point
ip unnumbered eth0
ip load-sharing per-packet
pvc x/xx
cbr xxx
oam-pvc manage
interface ATM1/3.10003 point-to-point
ip unnumbered eth0
ip load-sharing per-packet
pvc x/xx
cbr xxx
oam-pvc manage
ip route 0.0.0.0 0.0.0.0 ATM1/1.10001
ip route 0.0.0.0 0.0.0.0 ATM1/2.10002
ip route 0.0.0.0 0.0.0.0 ATM1/3.10003
ip route 0.0.0.0 0.0.0.0 ATM1/4.10004
Note that the service provider config has to be the same back to your
network,
Hope this will be helpfull
----- Original Message -----
From: "Muhammad Saleem" <msaleems@gmail.com>
To: <ccielab@groupstudy.com>
Sent: Wednesday, March 07, 2007 11:09 AM
Subject: combine 4 DSL connections into one CISCO
> Hi Everyone,
>
>
>
> How can I combine 4 DSL connections into one CISCO router and get combined
> bandwidth, like each DSL line is giving me 1mb download so at my end I want
> to use one router with four ADSL WICs and I should be able get 4mb combined
> download.
>
>
>
> I will appreciate urgent reply
>
>
>
> Many thanks
>
>
>
> Muhammad Saleem
>
> Networks Manager
>
> Saudi Arabia
>
> 00966-508205722
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
Disclaimer
************************************************************************
Aan dit bericht kunnen geen rechten worden ontleend. Dit bericht is
uitsluitend bestemd voor de geadresseerde. Als u dit bericht per abuis
hebt ontvangen, wordt u verzocht het te vernietigen en de afzender te
informeren. Wij adviseren u om bij twijfel over de juistheid of de
volledigheid van de mail contact met afzender op te nemen.
This message shall not constitute any rights or obligations.
This message is intended solely for the addressee.
If you have received this message in error, please delete it and
notify the sender immediately. When in doubt whether this message
is correct or complete, please contact the sender.
************************************************************************
This archive was generated by hypermail 2.1.4 : Sun Apr 01 2007 - 06:35:50 ART