From: Salman Abbas (dukelondon@gmail.com)
Date: Tue Jan 16 2007 - 12:20:36 ART
HI Abderrahim,
Thats exactly what the problem was. I've resolved it. Please read my last
email.
Thanks and Regards,
Salman
On 1/16/07, Abderrahim sadki <a_sadki1@hotmail.com> wrote:
>
> the revision number on both is the same.
>
>
>
> Should the serve have a higher number?
>
> try creating another vlan on the server to increase the revision number on
> the server so that it is accepted by the client.
>
> Also check the link between the switches is trunk.
>
>
>
> let me know what happens
>
>
>
>
>
> ------------------------------
> From: *"Tim Gregory" <tgregory@lincoln.ac.uk>*
> Reply-To: *"Tim Gregory" <tgregory@lincoln.ac.uk>*
> To: *"Salman Abbas" <dukelondon@gmail.com>, "Cisco certification" <
> ccielab@groupstudy.com>*
> Subject: *RE: Strange VTP problem*
> Date: *Tue, 16 Jan 2007 13:06:48 -0000*
> >Sometimes it fixes it if you change the VTP domain on the server to
> >something random, then back to the real one again to restart the
> >advertisment. Its always been a pain on switched networks.
> >
> >-----Original Message-----
> >From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> >Salman Abbas
> >Sent: 16 January 2007 11:59
> >To: Cisco certification
> >Subject: Strange VTP problem
> >
> >Hi GS,
> >
> >I'm pulling my hair as I cant figure out why VTP is not getting
> >synchronized between two directly connected 3550 switches. SW1 is server
> >and SW2 is client. I've created a few VLANs on SW1 but they are not
> >being propogated to
> >SW2 via VTP. Domain name is VTP01 and no vtp password has been
> >configured.
> >From my experience the MD5 digest of two switches must be the same if
> >they are to exchange VLANs. In this case however, I cant get them to be
> >the same even though both switches have identical vtp configuration.
> >
> >The show vtp status command output for the switches is as follows:
> >PLEASE help guys!!!!
> >
> >SW1(config)#do sh vtp sta
> >VTP Version : 2
> >Configuration Revision : 0
> >Maximum VLANs supported locally : 1005
> >Number of existing VLANs : 12
> >VTP Operating Mode : Server
> >VTP Domain Name : VTP01
> >VTP Pruning Mode : Disabled
> >VTP V2 Mode : Disabled
> >VTP Traps Generation : Disabled
> >MD5 digest : 0x15 0xD2 0x16 0x8B 0x2B 0xAB 0x98
> >0x4B
> >
> >SW2(config)#do sh vtp sta
> >VTP Version : 2
> >Configuration Revision : 0
> >Maximum VLANs supported locally : 1005
> >Number of existing VLANs : 5
> >VTP Operating Mode : Client
> >VTP Domain Name : VTP01
> >VTP Pruning Mode : Disabled
> >VTP V2 Mode : Disabled
> >VTP Traps Generation : Disabled
> >MD5 digest : 0x9F 0x69 0x29 0xFF 0xA1 0x48 0xB4
> >0xAB
> >
> >
> >Thanks in advance!!!!
> >
> >Regards,
> >Salman
> >
> >_______________________________________________________________________
> >Subscription information may be found at:
> >http://www.groupstudy.com/list/CCIELab.html
> >
> >_______________________________________________________________________
> >Subscription information may be found at:
> >http://www.groupstudy.com/list/CCIELab.html
>
>
> ------------------------------
> FREE pop-up blocking with the new MSN Toolbar MSN Toolbar<http://g.msn.com/8HMAEN/2752??PS=47575>Get it now!
This archive was generated by hypermail 2.1.4 : Thu Feb 08 2007 - 23:46:56 ART