From: Abderrahim sadki (a_sadki1@hotmail.com)
Date: Tue Jan 16 2007 - 12:18:46 ART
the revision number on both is the same.
Should the serve have a higher number?
try creating another vlan on the server to increase the revision number
on the server so that it is accepted by the client.
Also check the link between the switches is trunk.
let me know what happens
--------------------------------------------------------------------
From: "Tim Gregory" <tgregory@lincoln.ac.uk>
Reply-To: "Tim Gregory" <tgregory@lincoln.ac.uk>
To: "Salman Abbas" <dukelondon@gmail.com>, "Cisco certification"
<ccielab@groupstudy.com>
Subject: RE: Strange VTP problem
Date: Tue, 16 Jan 2007 13:06:48 -0000
>Sometimes it fixes it if you change the VTP domain on the server to
>something random, then back to the real one again to restart the
>advertisment. Its always been a pain on switched networks.
>
>-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
>Salman Abbas
>Sent: 16 January 2007 11:59
>To: Cisco certification
>Subject: Strange VTP problem
>
>Hi GS,
>
>I'm pulling my hair as I cant figure out why VTP is not getting
>synchronized between two directly connected 3550 switches. SW1 is
server
>and SW2 is client. I've created a few VLANs on SW1 but they are not
>being propogated to
>SW2 via VTP. Domain name is VTP01 and no vtp password has been
>configured.
>From my experience the MD5 digest of two switches must be the same
if
>they are to exchange VLANs. In this case however, I cant get them to
be
>the same even though both switches have identical vtp configuration.
>
>The show vtp status command output for the switches is as follows:
>PLEASE help guys!!!!
>
>SW1(config)#do sh vtp sta
>VTP Version : 2
>Configuration Revision : 0
>Maximum VLANs supported locally : 1005
>Number of existing VLANs : 12
>VTP Operating Mode : Server
>VTP Domain Name : VTP01
>VTP Pruning Mode : Disabled
>VTP V2 Mode : Disabled
>VTP Traps Generation : Disabled
>MD5 digest : 0x15 0xD2 0x16 0x8B 0x2B 0xAB 0x98
>0x4B
>
>SW2(config)#do sh vtp sta
>VTP Version : 2
>Configuration Revision : 0
>Maximum VLANs supported locally : 1005
>Number of existing VLANs : 5
>VTP Operating Mode : Client
>VTP Domain Name : VTP01
>VTP Pruning Mode : Disabled
>VTP V2 Mode : Disabled
>VTP Traps Generation : Disabled
>MD5 digest : 0x9F 0x69 0x29 0xFF 0xA1 0x48 0xB4
>0xAB
>
>
>Thanks in advance!!!!
>
>Regards,
>Salman
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
------------------------------------------------------------------------
FREE pop-up blocking with the new MSN Toolbar MSN Toolbar Get it now!
This archive was generated by hypermail 2.1.4 : Thu Feb 08 2007 - 23:46:56 ART