From: Narbik Kocharians (narbikk@gmail.com)
Date: Sat Jan 06 2007 - 21:12:03 ART
Even though Eigrp keeps track of the hop count (The output of "Show ip eigrp
top" command) you can not manipulate it directly, the best you can do is to
turn off all the "K" veriables (Using the "metric weight 0 0 0 0 0 0"
command) but that will show the composite metric for all destinations as 1.
On 1/6/07, Scott Morris <swm@emanon.com> wrote:
>
> Yup, Ctrl-F is a browser thing. The web-site search is what has been
> removed!
>
> HTH,
>
>
> Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, JNCIE
> #153, CISSP, et al.
> CCSI/JNCI-M/JNCI-J
> IPexpert VP - Curriculum Development
> IPexpert Sr. Technical Instructor
> smorris@ipexpert.com
> http://www.ipexpert.com
>
>
>
> -----Original Message-----
> From: Frank [mailto:ocsic@web.de]
> Sent: Saturday, January 06, 2007 12:23 PM
> To: Scott Morris; ccielab@groupstudy.com
> Subject: Re: EIGRP hop count
>
> Scott Morris schrieb:
>
> Hello Scott,
>
> is it possible to search with control-f in the documentation? Would like
> to
> keep my last brain cells. Hope i can. Thanks in advance.
>
> Frank
> > I'd probably look on the DocCD under the Command Reference... Perhaps
> > going to the IP Routing Protocols section and looking at EIGRP Commands.
> >
> > Perhaps a Ctrl-F for "hop" or "hop count" would help things out there?
> > :)
> >
> > http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cr/
> > hirp_r
> > /rte_eih.htm#wp1000064
> >
> > Sometimes it good to figure out what keywords are important to help
> > you search for things. Nobody will ever memorize all of the commands.
> > Even after all these years, I still look things up (most likely 'cause
> > I killed too many brain cells at an earlier age, but that's a different
> story!
> > (grin))
> >
> > HTH,
> >
> >
> > Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713,
> > JNCIE #153, CISSP, et al.
> > CCSI/JNCI-M/JNCI-J
> > IPexpert VP - Curriculum Development
> > IPexpert Sr. Technical Instructor
> > smorris@ipexpert.com
> > http://www.ipexpert.com
> >
> >
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> > Of Bit Gossip
> > Sent: Saturday, January 06, 2007 10:39 AM
> > To: groupstudy
> > Subject: EIGRP hop count
> >
> > Hi group,
> > is there any way to manipulate hop count in eigrp?
> > I noticed that offset-list manipulates the composite metric but NOT
> > hop-count!
> > Thanks,
> > Luca
> >
> > ______________________________________________________________________
> > _ Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> > ______________________________________________________________________
> > _ Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Narbik Kocharians CCIE# 12410 (R&S, SP, Security) CCSI# 30832 Network Learning, Inc. (CCIE class Instructor) www.ccbootcamp.com (CCIE Training)
This archive was generated by hypermail 2.1.4 : Thu Feb 08 2007 - 23:46:55 ART