From: Frank (ocsic@web.de)
Date: Thu Dec 28 2006 - 11:18:49 ART
Hi,
i have a problem with ospf priority.
The task asks not to configure ip ospf interface commands on the spokes,
so it suggests to configure
ip ospf priority 255 on the hub. (255 or a higher value as the default 1)
But the hub is not elected as the DR.
What could be the reason for this?
Rack1R5#sh ip ospf int | inc Pri
Transmit Delay is 1 sec, State BDR, Priority 255
Rack1R5#sh ip ospf nei
Neighbor ID Pri State Dead Time Address Interface
150.1.2.2 1 FULL/DR 00:01:36 173.1.125.2
Serial0/0.125
Rack1R2#sh ip ospf int s0/0 | inc Pri| Des
Transmit Delay is 1 sec, State DR, Priority 1
Designated Router (ID) 150.1.2.2, Interface address 173.1.125.2
Backup Designated router (ID) 150.1.5.5, Interface address 173.1.125.5
Adjacent with neighbor 150.1.5.5 (Backup Designated Router)
Frank
This archive was generated by hypermail 2.1.4 : Tue Jan 02 2007 - 07:50:39 ART