Re: ospf priority

From: Frank (ocsic@web.de)
Date: Thu Dec 28 2006 - 12:34:54 ART


Ramu Perumal schrieb:

Hi,

i have cleared already the process. "clear ip ospf p"

Currently i have only two routers and they are forming the adjacency
over a frame link.

R2 keeps winning the election and does not pay attention to the prio. I
understand
that they could not take over a DR is already elected, but in the case
when only two
are forming an adjacency...

R5

interface Serial0/0.125 multipoint
 ip address 173.1.125.5 255.255.255.0
 ip ospf network broadcast
 ip ospf hello-interval 30
 ip ospf priority 255
 frame-relay interface-dlci 501
 frame-relay interface-dlci 502
 no frame-relay inverse-arp IP 503
 no frame-relay inverse-arp IP 513
end

R2
interface Serial0/0
 ip address 173.1.125.2 255.255.255.0
 encapsulation frame-relay
 frame-relay map ip 173.1.125.1 205
 frame-relay map ip 173.1.125.5 205 broadcast
 no frame-relay inverse-arp
 frame-relay lmi-type cisco
end

Frank

> In a multiaccess network (i hv seen this in a bcast net) where there is
> DR/BDR election, the router that wins the election becomes the BDR first and
> then the DR is elected. looks like u hv a similar case....
> If you are configuring a non-broadcast network, you can try the neighbor
> command to set the priority of the spokes to ZERO.
> Hope this helps...
>
> Thanks
> Ramu
> ----- Original Message -----
> From: "Frank" <ocsic@web.de>
> To: <ccielab@groupstudy.com>
> Sent: Thursday, December 28, 2006 7:48 PM
> Subject: ospf priority
>
>
>
>> Hi,
>>
>> i have a problem with ospf priority.
>>
>> The task asks not to configure ip ospf interface commands on the spokes,
>> so it suggests to configure
>> ip ospf priority 255 on the hub. (255 or a higher value as the default 1)
>>
>> But the hub is not elected as the DR.
>>
>> What could be the reason for this?
>>
>>
>> Rack1R5#sh ip ospf int | inc Pri
>> Transmit Delay is 1 sec, State BDR, Priority 255
>>
>> Rack1R5#sh ip ospf nei
>> Neighbor ID Pri State Dead Time Address
>>
> Interface
>
>> 150.1.2.2 1 FULL/DR 00:01:36 173.1.125.2
>> Serial0/0.125
>>
>> Rack1R2#sh ip ospf int s0/0 | inc Pri| Des
>> Transmit Delay is 1 sec, State DR, Priority 1
>> Designated Router (ID) 150.1.2.2, Interface address 173.1.125.2
>> Backup Designated router (ID) 150.1.5.5, Interface address 173.1.125.5
>> Adjacent with neighbor 150.1.5.5 (Backup Designated Router)
>>
>>
>>
>> Frank
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html



This archive was generated by hypermail 2.1.4 : Tue Jan 02 2007 - 07:50:39 ART