From: Alexei Monastyrnyi (alexeim@orcsoftware.com)
Date: Thu Nov 23 2006 - 09:54:35 ART
Hi.
If I understand it right from DocCD, normal burst is what you have above
the police rate. 256k-128k=128k => to bytes 16000/ If it should be
considered together with police rate, then just 256k=>32000 bytes. In
either case police rate should be 128000, not 256000 IMO.
I would go for
police 128000 16000 exceed action drop
HTH
a.
Salman Abbas wrote:
> Hi guys,
>
> Pls help to answer the following question:
>
>
> On SW1 int fa0/6, limit all UDP traffic by maximum 256Kbps and normal
> 128Kbps to avoid congestion on your VLAN.
>
>
> My solution is:
>
> mls qos
> access-list 101 permit udp any any
>
> class-map LIMIT
> match access-group 101
>
> policy-map POLICE
> class LIMIT
> police 256000 _____ exceed action drop
>
> int fa0/6
> service-policy input POLICE
>
> Now the part that I dont understand is that second value in the police
> command which is "Burst in bytes". How can I calculate it based on the
> question above? Also, am I missing anyting else in my configuration?
>
>
> Thanks in advance,
>
> Cheers!!!
>
> Salman
This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:48 ART