From: Ivan (ivan@iip.net)
Date: Thu Nov 23 2006 - 06:49:12 ART
I think you mean
match interface.
As you wrote "match ip address Loopback168 ..."
You need to define ACL with such names.
On Thursday 23 November 2006 00:57, Cisco Key wrote:
> Hi All
>
> Please can you shed some light on this for me
>
> If I configure the following:
>
> ip access-list standard Connected_OSPF
> permit 172.16.168.0
> permit 172.16.169.0
> permit 172.16.170.0
>
> route-map Connected_OSPF permit 10
> match ip address Connected_OSPF
>
> or
>
> route-map connected_loopbacks permit 10
> match ip address Loopback168 Loopback169 Loopback170
>
> Whats the difference? I say non!
>
> I prefer to do less lines in my configuration but is there a diffrence?
>
> But is there a problem me doing less?
>
> Thanks in advance
> Paul
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
-- Ivan
This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:48 ART