From: Frank (ocsic@web.de)
Date: Thu Nov 16 2006 - 11:28:38 ART
William.Nellis@cox.com schrieb:
Well, when i add area 0 on a loopback, this works. But that should work. :-)
> Does it explicitly say no to area 0? Have you tried running area 0 on a
> loopback?
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Frank
> Sent: Wednesday, November 15, 2006 11:26 PM
> To: Duane Dewitt
> Cc: Cisco certification
> Subject: Re: ospf without area 0
>
> Frank <ocsic@web.de>Duane Dewitt schrieb:
>
> Hi,
>
> it seems like there are IOS versions out, where this might work, but
> with my versions it does not.
>
> As looking into the archive, there was a discussion on the three months
> ago. With the result, that
> it worked and it worked not also with multiple areas.
>
> Frank
>
>> As far as I know you are able to run a single non-zero OSPF area, but
>>
> if
>
>> you want to run multiple areas you must have area 0 between them.
>>
>>
>>
> ------------------------------------------------------------------------
>
>> ------------
>>
>> Duane de Witt
>> Technical Sales Consultant
>> CCIE #15715
>>
>> Verizon Business
>> 113 Bowling Avenue
>> Gallo Manor
>> Johannesburg, 2128
>> South Africa
>>
>> Telephone + 27 11 235 6543
>> Mobile +27 83 445 2768
>> Customer Service 08600 88638
>>
>> www.verizonbusiness.com/za
>>
>>
>> Verizon Business - global capability. personal accountability.
>>
>>
>> Verizon Business is a brand of Verizon South Africa (Pty) Ltd. This
>> e-mail is strictly confidential and intended only for use by the
>> addressee unless otherwise indicated.
>>
>>
>>
>> -----Original Message-----
>> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
>>
> Of
>
>> Frank
>> Sent: 16 November 2006 07:49 AM
>> To: Cisco certification
>> Subject: ospf without area 0
>>
>> Hi,
>>
>> i came about a topic where there is no area 0 configured. There have
>> been three different areas but no area 0.
>> One area is connected over a virtual link to the other and that's it.
>>
>> I could not get the virutal link to work, without area 0. I read about
>>
>
>
>> someone geting this to work.
>>
>> Is it possible to have a converged network without area 0? RFC 3509
>> tells it has to have one.
>>
>>
>> Frank
>>
>>
>>
> _______________________________________________________________________
>
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:47 ART