From: Bajo (bajoalex@gmail.com)
Date: Thu Nov 16 2006 - 11:49:33 ART
Nope. EIGRP does not allow u to manipulate external distance per some source
or gateway ...
On 11/16/06, CCIEin2006 <ciscocciein2006@gmail.com> wrote:
>
> Funny thing, Maxim, I just ran into the same problem!
>
> Ivan - in your example you were only able to modify the distance of ALL
> external EIGRP routes with the distance eigrp commands.
>
> But how do you modify the distance of only a select external eigrp route?
>
>
> On 11/16/06, Maxim Kurushkin <m.kurushkin@orange-ftgroup.ru> wrote:
> >
> > Ivan, yes, it work.
> > But I want AD 170 for all EX routes and AD 10 for only one specific EX
> > route. How it can be made?
> >
> > With best regards,
> > Maxim
> >
> >
> > Ivan wrote:
> > > Answer to your first question:
> > >
> > > This is a variation:
> > > R5(config-router)#distance eigrp 89 169
> > >
> > > D EX 151.10.21.0/24 [169/18073600] via 151.10.35.3, 00:00:43,
> > > Serial0/1
> > > D 151.10.23.0/24 [89/18560000] via 151.10.35.3, 00:00:43,
> > Serial0/1
> > >
> > > Here is another variation:
> > >
> > > distance 60 0.0.0.0 255.255.255.255 99
> > > !
> > > access-list 99 permit 151.10.23.0 0.0.0.255
> > > access-list 99 permit 151.10.21.0 0.0.0.255
> > > !
> > > D 151.10.23.0/24 [60/18560000] via 151.10.35.3, 00:02:27, Serial0/1
> > > D 151.10.102.0/24 [90/3200000] via 151.10.25.2, 00:00:22, Serial0/0
> > > D EX 151.10.21.0/24 [169/18073600] via 151.10.35.3, 00:02:28,
> Serial0/1
> > >
> > > !!
> > >
> > > Here is the whole thing
> > > router eigrp 1
> > > distance eigrp 90 169
> > > distance 60 0.0.0.0 255.255.255.255 99
> > > !
> > > access-list 99 permit 151.10.23.0 0.0.0.255
> > > access-list 99 permit 151.10.21.0 0.0.0.255
> > >
> > >
> > > On Thursday 16 November 2006 11:30, Maxim Kurushkin wrote:
> > >
> > >> Good Day, Group.
> > >> I'm confused with eigrp distance XX settings... and have 2 questions:
> > >>
> > >> 1)
> > >> Does command distance XX affect only on internal routes? Where can I
> > >> read more information about it?
> > >> Example:
> > >> access-list 23 permit 150.1.3.0
> > >> access-list 23 permit 150.1.2.0
> > >> router eigrp 10
> > >> passive-interface default
> > >> no passive-interface GigabitEthernet0/0
> > >> network 187.1.56.6 0.0.0.0
> > >> distance 10 0.0.0.0 255.255.255.255 23
> > >>
> > >> sh ip route eigrp | i 150.1.2|150.1.3
> > >> D EX 150.1.3.0/24 [170/2174976] via 187.1.56.5, 00:05:46,
> > >> GigabitEthernet0/0
> > >> D 150.1.2.0/24 [10/2300416] via 187.1.56.5, 00:05:47,
> > >> GigabitEthernet0/0
> > >>
> > >> 2)
> > >> How do multiple distance XX commands work? For multiple distance XX
> > >> commands do all source must be different? Where can I read more
> > >> information about it?
> > >> Example:
> > >> Rack1R6(config-router)#do sh run | i distance
> > >> distance 10 0.0.0.0 255.255.255.255 23
> > >> Rack1R6(config-router)#distance 11 0.0.0.0 255.255.255.255 24
> > >> Rack1R6(config-router)#do sh run | i distance
> > >> distance 11 0.0.0.0 255.255.255.255 24
> > >> Rack1R6(config-router)#distance 11 150.1.1.1 0.0.0.0 25
> > >> Rack1R6(config-router)#do sh run | i distance
> > >> distance 11 0.0.0.0 255.255.255.255 24
> > >> distance 11 150.1.1.1 0.0.0.0 25
> > >>
> > >> With best regards,
> > >> Maxim
> > >>
> > >>
> _______________________________________________________________________
> > >> Subscription information may be found at:
> > >> http://www.groupstudy.com/list/CCIELab.html
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Kind Regards,Bajo
This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:47 ART