From: William.Nellis@cox.com
Date: Thu Nov 16 2006 - 10:53:01 ART
Does it explicitly say no to area 0? Have you tried running area 0 on a
loopback?
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Frank
Sent: Wednesday, November 15, 2006 11:26 PM
To: Duane Dewitt
Cc: Cisco certification
Subject: Re: ospf without area 0
Frank <ocsic@web.de>Duane Dewitt schrieb:
Hi,
it seems like there are IOS versions out, where this might work, but
with my versions it does not.
As looking into the archive, there was a discussion on the three months
ago. With the result, that
it worked and it worked not also with multiple areas.
Frank
> As far as I know you are able to run a single non-zero OSPF area, but
if
> you want to run multiple areas you must have area 0 between them.
>
>
------------------------------------------------------------------------
> ------------
>
> Duane de Witt
> Technical Sales Consultant
> CCIE #15715
>
> Verizon Business
> 113 Bowling Avenue
> Gallo Manor
> Johannesburg, 2128
> South Africa
>
> Telephone + 27 11 235 6543
> Mobile +27 83 445 2768
> Customer Service 08600 88638
>
> www.verizonbusiness.com/za
>
>
> Verizon Business - global capability. personal accountability.
>
>
> Verizon Business is a brand of Verizon South Africa (Pty) Ltd. This
> e-mail is strictly confidential and intended only for use by the
> addressee unless otherwise indicated.
>
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Frank
> Sent: 16 November 2006 07:49 AM
> To: Cisco certification
> Subject: ospf without area 0
>
> Hi,
>
> i came about a topic where there is no area 0 configured. There have
> been three different areas but no area 0.
> One area is connected over a virtual link to the other and that's it.
>
> I could not get the virutal link to work, without area 0. I read about
> someone geting this to work.
>
> Is it possible to have a converged network without area 0? RFC 3509
> tells it has to have one.
>
>
> Frank
>
>
This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:47 ART