From: Richard Dumoulin (Richard.Dumoulin@vanco.fr)
Date: Sun Nov 05 2006 - 00:34:59 ART
Ok, so that was the trick. It did not survive a reboot of R2 or R1 though :D
-- Richard
-----Message d'origine-----
De : Brian Dennis [mailto:bdennis@internetworkexpert.com]
Envoyi : Sunday, November 05, 2006 4:08 AM
@ : Richard Dumoulin; Alexey Tolstenok
Cc : Group study
Objet : RE: RE : IE Core WB Lab 3 Task 4.5
Have you tried to add an interface into area 0 to get the virtual-link
up and then remove the interface from area 0 once it's up?
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Richard Dumoulin
Sent: Saturday, November 04, 2006 6:42 PM
To: Alexey Tolstenok
Cc: Group study
Subject: RE : IE Core WB Lab 3 Task 4.5
It is not working for me either and I am using c3660-jk9o3s-mz.124-10a.
Alexey, I would not worry too much about this scenario...
-- Richard
-----Message d'origine-----
De : nobody@groupstudy.com [mailto:nobody@groupstudy.com] De la part de
Alexey Tolstenok
Envoyi : Saturday, November 04, 2006 11:32 AM
@ : Brian Dennis
Cc : Group study
Objet : Re: IE Core WB Lab 3 Task 4.5
I've tried this scenario and still have no idea how to accomplish this
state. First I define area 12 betw. R1, R2 then virtual-link between R1
and
R2 and after that area 13 on R2, R3
But virtual-link isn't even try to come up. What I'm doing wrong?
2006/11/4, Brian Dennis <bdennis@internetworkexpert.com>:
>
> Here is an example of an OSPF network with only two non-zero areas
> working using a virtual-link. The configuration is: R1 <-Ethernet->
R2
> <-Serial-> R3. Area 12 is between R1 and R2. Area 13 is between R2
and
> R3. There is a virtual-link between R1 and R2 across area 12.
>
> If you try to build this network yourself be sure to create the first
> OSPF area then the virtual link before adding on the second OSPF area.
>
>
-- SY, Alexey
This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:45 ART