From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Sat Nov 04 2006 - 19:26:32 ART
You don't have a default metric configured (that we can see from your
configuration) for redistribution of the connected routes on R3. Also
can you send us the configuration for the route-map used on R3?
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
shank shank
Sent: Saturday, November 04, 2006 1:52 PM
To: CCIE Group
Subject: redistribution question
all,
i have the following setup R2-------Eigrp-----R3----ospf-----R5
i have
used the netwrok command to advertise the loopback 0 interface into ospf
area
0 on R3. i alsodid mutual redistribtion between ospf and Eigrp. the
problem
is that i see all routes between the two protocols. except for the
loopback of
R3 that does not show on R2. to clarify i do see all other routes from
ospf
domanin on R2 except the loopback of R3. and i see all routes from eigrp
form
R2 on R3. this is the configs:
R2
router eigrp 100
network 150.9.2.2 0.0.0.0
network 183.9.2.2 0.0.0.0
network 183.9.123.2 0.0.0.0
network 183.9.0.0
no
auto-summary
eigrp router-id 150.9.2.2
R3
router eigrp 100
redistribute
connected route-map conn
redistribute ospf 1 metric 1 1 1 1 1
network
183.9.123.3 0.0.0.0
no auto-summary
eigrp router-id 150.9.3.3
!
router ospf
1
router-id 150.9.3.3
log-adjacency-changes
redistribute eigrp 100
network
150.9.3.3 0.0.0.0 area 0
network 183.9.0.3 0.0.0.0 area 0
any reason why?
shanky,
thanks
This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:45 ART