From: Eugene Ward (eward15@juno.com)
Date: Sat Nov 04 2006 - 19:20:45 ART
Shanky,
What does your route map "conn" reference on R3?
Eugene
-----------------------------------------------------------------------------
----------------------------------------------------
all,
i have the following setup R2-------Eigrp-----R3----ospf-----R5
i have
used the netwrok command to advertise the loopback 0 interface into ospf area
0 on R3. i alsodid mutual redistribtion between ospf and Eigrp. the problem
is that i see all routes between the two protocols. except for the loopback
of
R3 that does not show on R2. to clarify i do see all other routes from ospf
domanin on R2 except the loopback of R3. and i see all routes from eigrp form
R2 on R3. this is the configs:
R2
router eigrp 100
network 150.9.2.2 0.0.0.0
network 183.9.2.2 0.0.0.0
network 183.9.123.2 0.0.0.0
network 183.9.0.0
no
auto-summary
eigrp router-id 150.9.2.2
R3
router eigrp 100
redistribute connected route-map conn
redistribute ospf 1 metric 1 1 1 1 1
network 183.9.123.3 0.0.0.0
no auto-summary
eigrp router-id 150.9.3.3
!
router ospf 1
router-id 150.9.3.3
log-adjacency-changes
redistribute eigrp 100
network 150.9.3.3 0.0.0.0 area 0
network 183.9.0.3 0.0.0.0 area 0
any reason why?
shanky,
thanks
This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:45 ART