From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Sat Oct 14 2006 - 20:21:09 ART
Add the "control disable" after the "type udpEcho dest-ipaddr
255.255.255.255 dest-port 3434".
HTH,
Brian McGahan, CCIE #8593 (R&S/SP)
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> david robin
> Sent: Saturday, October 14, 2006 6:50 AM
> To: Cisco certification
> Subject: RTR configuration
>
> Dear All,
> I configure a router in lab in order to broadcast udp packets with
> destination port 3434 I do the following configuration:
>
> rtr 1
> type udpEcho dest-ipaddr 255.255.255.255 dest-port 3434
> frequency 10
> rtr schedule 1 life forever start-time now
> !
>
> but when debuging the router is sending udp traffic but on different
port
> (
> port 1967)as shown:
>
> Rack1R6#debug ip packet detail
> Oct 14 13:21:42.591: IP: s=174.1.67.6 (local),
> d=255.255.255.255(FastEthernet0/0), len 80, sending broad/multicast
> *Oct 14 13:21:42.595: UDP src=56472, dst=1967
>
> I dont know why, do I miss something ?
>
>
This archive was generated by hypermail 2.1.4 : Wed Nov 01 2006 - 07:29:05 ART