From: Michael Stout (michaelgstout@hotmail.com)
Date: Thu Sep 28 2006 - 11:46:21 ART
Try the command "no ip pim dm-fallbak"
You might be using dense mode
--------------------------------------------------------------------
From: "Mohamed Saeed" <mohamed_saeed2@rayacorp.com>
Reply-To: "Mohamed Saeed" <mohamed_saeed2@rayacorp.com>
To: <ccielab@groupstudy.com>
Subject: Auto-RP Question
Date: Thu, 28 Sep 2006 14:00:52 +0200
Hi All,
Should I enable IP PIM under the loopback interface of the RP router
or
the mapping agent?
I have tested with / without enabling "ip pim sparse-dense" mode. I
have
found that in both cases, the multicast traffic is delivered
smoothly. I
wonder if somebody has gone through this.
Regards
Mohamed Saeed, CCNP - CCIP
_______________________________________________________________________
Subscription information may be found at:
http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Oct 01 2006 - 16:55:41 ART