From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Thu Sep 28 2006 - 12:58:21 ART
Some IOS versions will not allow candidate-rp messages or
mapping agent messages to be originated from non-PIM interfaces. In
order to ensure compatibility between versions you *should* enable PIM
on the Loopback interface if you are sourcing auto-rp messages from it.
HTH,
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Mohamed Saeed
> Sent: Thursday, September 28, 2006 7:01 AM
> To: ccielab@groupstudy.com
> Subject: Auto-RP Question
>
> Hi All,
>
>
>
> Should I enable IP PIM under the loopback interface of the RP router
or
> the mapping agent?
>
>
>
> I have tested with / without enabling "ip pim sparse-dense" mode. I
have
> found that in both cases, the multicast traffic is delivered smoothly.
I
> wonder if somebody has gone through this.
>
>
>
> Regards
>
> Mohamed Saeed, CCNP - CCIP
>
>
This archive was generated by hypermail 2.1.4 : Sun Oct 01 2006 - 16:55:41 ART