From: Darby Weaver (darbyweaver@yahoo.com)
Date: Fri Sep 22 2006 - 04:18:26 ART
Belay me question about this one - Thanks Brad.
--- Brad Ellis <brad@ccbootcamp.com> wrote:
> Substituted as in different gateways, sure.
> Substituted as practice instead
> of a VG248, no. The VG248 is menu driven and has
> it's own OS, while the
> VG200 and VG224 are IOS based. You probably dont
> need to purchase your own
> VG248, you could use a bit of remote rack time to
> get familiar with them.
>
> thanks,
> Brad Ellis
> CCIE#5796 (R&S / Security)
> CCSI#30482
> brad@ccbootcamp.com
> www.ccbootcamp.com (Cisco Training and Advanced
> Technology Rental Racks)
> Voice: 702-968-5100
> FAX: 702-446-8012
> ----- Original Message -----
> From: <ccielab@cox.net>
> To: "Brad Ellis" <brad@ccbootcamp.com>
> Cc: <ccielab@groupstudy.com>
> Sent: Thursday, September 21, 2006 9:07 AM
> Subject: Re: ccie voice Lab equipment
>
>
> Can you tell me briefly what is the difference in
> the
> VG200, VG224 and VG248 and could these be subsituted
> for the
> VG248 in a lab setup?
>
>
>
> ---- Brad Ellis <brad@ccbootcamp.com> wrote:
> > JP,
> >
> > Sure, you can use XM routers, just get the NM-HDV
> cards with PVDMs and the
> > appropriate voice wic cards.
> >
> > For a physical difference on the cat 3550s, look
> at the front of your Cat
> > 3550. On the top right side, it will actually say
> "INLINE POWER" and the
> > GBIC slots will be lined up on top of each other
> if the unit has inline
> > power. (If the unit does NOT have inline power,
> the GBICs will be
> > horizontally next to each other)
> >
> > thanks,
> > Brad Ellis
> > CCIE#5796 (R&S / Security)
> > CCSI#30482
> > brad@ccbootcamp.com
> > www.ccbootcamp.com (Cisco Training and Advanced
> Technology Rental
> > Voice: 702-968-5100
> > FAX: 702-446-8012
> > ----- Original Message -----
> > From: <jatinder.p.singh@bt.com>
> > To: <brad@ccbootcamp.com>
> > Sent: Wednesday, September 20, 2006 3:46 AM
> > Subject: ccie voice Lab equipment
> >
> >
> > > Brad,
> > >
> > > Can we use 2621XM in place of 2811 routers. And
> can you please specify
> > > in detail if I will use 2621XM what cards I
> required to set up the full
> > > lab.
> > > I have 3550 switch but I don't know that it was
> with inline power or not
> > > how I can check ??
> > >
> > > Can you please specify in detail because I have
> to place a order for the
> > > hardware.
> > > I already have
> > > a.. 6 Cisco 7960G IP Phones
> > > a.. 1 Catalyst 6503 w/
> Sup2/MFC2/PFC2,6608-T1,6348-RJ45V
> > > Software of cisco call manager and cisco unity.
> > > I also have hardware which I have used for
> routing and switching lab.
> > >
> > > Thanks in Advance.
> > >
> > >
> > > Best Regards
> > >
> > > J P Singh | CCIE:- 13620 | Specialist: Design,
> Development & Consultancy
> > > Services | Solutions Engineering Group , BT
> Global Services | Tel:+44
> > > (0)1732 475950 | Mob:+44 (0)7918 886985 |
> Fax:+44 (0)1732 452335 | BT
> > > Meet Me: 0870 241 1409 Participants Pass code:
> 33976421 | E:
> > > jatinder.p.singh@bt.com |
> www.bt.com/globalservices
> > >
> > > British Telecommunications plc
> > > Registered office: 81 Newgate Street London EC1A
> 7AJ
> > > Registered in England no. 1800000.
> > > This electronic message contains information
> from British
> > > Telecommunications plc which may be privileged
> or confidential. The
> > > information is intended to be for the use of the
> individual(s) or entity
> > > named above. If you are not the intended
> recipient be aware that any
> > > disclosure, copying, distribution or use of the
> contents of this
> > > information is prohibited. If you have received
> this electronic message
> > > in error, please notify us by telephone or email
> (to the numbers or
> > > address above) immediately.
> > >
> > >
> > > -----Original Message-----
> > > From: nobody@groupstudy.com
> [mailto:nobody@groupstudy.com] On Behalf Of
> > > Brad Ellis
> > > Sent: 06 September 2006 17:29
> > > To: tony hall; ccielab@groupstudy.com
> > > Subject: Re: ccie voice [bcc][faked-from]
> > >
> > >
> > > Tony,
> > >
> > > Hi! Here's what we have in our racks and it
> works really well:
> > >
> > > a.. 3 Cisco 2811s running 12.4(2)T (HQ, Branch
> 1, Branch 2)
> > > a.. 1 Cisco Catalyst 3550 w/ POE running EMI
> code
> > > a.. 6 Cisco 7960G IP Phones
> > > a.. 1 Catalyst 6503 w/
> Sup2/MFC2/PFC2,6608-T1,6348-RJ45V
> > > a.. 1 VG248
> > > a.. 1 Server w/ CallManager 4.1(3) and IPCC
> Express
> > > a.. 1 Server w/ Unity 4.0(5)
> > > a.. 1 Cisco 2811 for PSTN/WAN cloud
> > > a.. 1 NM-CUE (Cisco Unity Express Network
> Module)
> > >
> > > Just dont forget the PVMD2's in the 2811
> routers. :)
> > >
> > > thanks,
> > > Brad Ellis
> > > CCIE#5796 (R&S / Security)
> > > CCSI#30482
> > > Network Learning Inc
> > > www.ccbootcamp.com (Cisco Training and Advanced
> Technology Rental Racks)
> > > ----- Original Message -----
> > > From: "tony hall" <tony_hall123@hotmail.co.uk>
> > > To: <ccielab@groupstudy.com>
> > > Sent: Wednesday, September 06, 2006 2:51 AM
> > > Subject: ccie voice [bcc][faked-from]
> > >
> > >
> > >> Hi,
> > >> can someome give me the idea that , what
> equipments I need to build
> > >> Voice lab.
> > >>
> > >> Regards.
> > >> TONY.
> > >>
> > >>
>
This archive was generated by hypermail 2.1.4 : Sun Oct 01 2006 - 16:55:41 ART