From: haducbinh (haducbinh@vnpro.org)
Date: Thu Sep 14 2006 - 23:12:44 ART
Hi Group!
I have problem about bridge-group that I can't get over!
This is my topology!
R1(se0/1/0)--------(s0/1/0)R2(s0/2/0)-------------(s0/1/0)R3
I want to R2 bridge its S0/1/0 and S0/2/0 so that R1 can ping R3 in the same
subnet! So I configure like this:
R1(config)#int se0/1/0
R1(config-if)#ip add 1.1.1.1 255.255.255.0
R2(config)#bridge irb
R2(config)#bridge 1 protocol ieee
R2(config)#bridge 1 route ip
R2(config)#int se0/1/0
R2(config-if)#bridge-group 1
R2(config)#int se0/20
R2(config-if)#bridge-group 1
R3(config)#int se0/1/0
R3(config-if)#ip add 1.1.1.2 255.255.255.0
But the R1 can not ping R3!
I do not understand why!
Thanks!
HaDucBinh
Mail: haducbinh@vnpro.org or haducbinh@yahoo.com
Phone: 0908 191 322
----------------------------------------------------------------------------
--------
Vietnamese Professionals (VnPro)
149/1D Ung Van Khiem Street, Ward 25, Binh Thanh District, Ho Chi Minh City.
Tel: (08) 5124257 - (08) 5125314
Fax: (08) 5124314
Website: http://vnpro.vn
Support forum: http://vnpro.org
This archive was generated by hypermail 2.1.4 : Sun Oct 01 2006 - 16:55:40 ART