From: Daniel Fredrick (dfredrick@gmail.com)
Date: Thu Sep 14 2006 - 23:29:27 ART
I am a novice at best for Bridge groups... but I believe that you need to
create a BVI.
Like try putting this config on R2
int bvi 1
ip add 1.1.1.3 255.255.255.0
Maybe that'll work...
Good luck...
Dan
On 9/14/06, haducbinh <haducbinh@vnpro.org> wrote:
>
> Hi Group!
>
>
>
> I have problem about bridge-group that I can't get over!
>
>
>
> This is my topology!
> R1(se0/1/0)--------(s0/1/0)R2(s0/2/0)-------------(s0/1/0)R3
>
> I want to R2 bridge its S0/1/0 and S0/2/0 so that R1 can ping R3 in the
> same
> subnet! So I configure like this:
>
>
>
> R1(config)#int se0/1/0
>
> R1(config-if)#ip add 1.1.1.1 255.255.255.0
>
>
>
> R2(config)#bridge irb
>
> R2(config)#bridge 1 protocol ieee
>
> R2(config)#bridge 1 route ip
>
> R2(config)#int se0/1/0
>
> R2(config-if)#bridge-group 1
>
> R2(config)#int se0/20
>
> R2(config-if)#bridge-group 1
>
>
>
> R3(config)#int se0/1/0
>
> R3(config-if)#ip add 1.1.1.2 255.255.255.0
>
>
>
> But the R1 can not ping R3!
>
> I do not understand why!
>
>
>
> Thanks!
>
> HaDucBinh
>
> Mail: haducbinh@vnpro.org or haducbinh@yahoo.com
>
> Phone: 0908 191 322
>
>
> ----------------------------------------------------------------------------
> --------
> Vietnamese Professionals (VnPro)
> 149/1D Ung Van Khiem Street, Ward 25, Binh Thanh District, Ho Chi Minh
> City.
> Tel: (08) 5124257 - (08) 5125314
> Fax: (08) 5124314
> Website: http://vnpro.vn
> Support forum: http://vnpro.org
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Oct 01 2006 - 16:55:40 ART