From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Fri Sep 15 2006 - 00:24:00 ART
What layer 2 protocol are the Serial interfaces running?
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> haducbinh
> Sent: Thursday, September 14, 2006 9:36 PM
> To: 'Daniel Fredrick'
> Cc: ccielab@groupstudy.com
> Subject: RE: Bridge-Group
>
> Even I create a BVI! But it still don't work!
>
> I tried on 2801 router with IOS 12.3 and 26xx 12.2
>
>
>
> HaDucBinh
>
> Mail: haducbinh@vnpro.org or haducbinh@yahoo.com
>
> Phone: 0908 191 322
>
>
------------------------------------------------------------------------
-- > -- > -------- > Vietnamese Professionals (VnPro) > 149/1D Ung Van Khiem Street, Ward 25, Binh Thanh District, Ho Chi Minh > City. > Tel: (08) 5124257 - (08) 5125314 > Fax: (08) 5124314 > Website: http://vnpro.vn > Support forum: http://vnpro.org > > _____ > > From: Daniel Fredrick [mailto:dfredrick@gmail.com] > Sent: Friday, September 15, 2006 9:29 AM > To: haducbinh > Cc: ccielab@groupstudy.com > Subject: Re: Bridge-Group > > > > I am a novice at best for Bridge groups... but I believe that you need to > create a BVI. > > Like try putting this config on R2 > > int bvi 1 > ip add 1.1.1.3 255.255.255.0 > > Maybe that'll work... > > Good luck... > > Dan > > On 9/14/06, haducbinh <haducbinh@vnpro.org <mailto:haducbinh@vnpro.org> > > wrote: > > Hi Group! > > > > I have problem about bridge-group that I can't get over! > > > > This is my topology! > R1(se0/1/0)--------(s0/1/0)R2(s0/2/0)-------------(s0/1/0)R3 > > I want to R2 bridge its S0/1/0 and S0/2/0 so that R1 can ping R3 in the > same > subnet! So I configure like this: > > > > R1(config)#int se0/1/0 > > R1(config-if)#ip add 1.1.1.1 255.255.255.0 > > > > R2(config)#bridge irb > > R2(config)#bridge 1 protocol ieee > > R2(config)#bridge 1 route ip > > R2(config)#int se0/1/0 > > R2(config-if)#bridge-group 1 > > R2(config)#int se0/20 > > R2(config-if)#bridge-group 1 > > > > R3(config)#int se0/1/0 > > R3(config-if)#ip add 1.1.1.2 255.255.255.0 > > > > But the R1 can not ping R3! > > I do not understand why! > > > > Thanks! > > HaDucBinh > > Mail: haducbinh@vnpro.org or haducbinh@yahoo.com > > Phone: 0908 191 322 > > ------------------------------------------------------------------------ -- > -- > -------- > Vietnamese Professionals (VnPro) > 149/1D Ung Van Khiem Street, Ward 25, Binh Thanh District, Ho Chi Minh > City. > Tel: (08) 5124257 - (08) 5125314 > Fax: (08) 5124314 > Website: http://vnpro.vn > Support forum: http://vnpro.org > >
This archive was generated by hypermail 2.1.4 : Sun Oct 01 2006 - 16:55:40 ART