From: CCIEin2006 (ciscocciein2006@gmail.com)
Date: Wed Sep 13 2006 - 22:00:59 ART
This is from IE Vol2 lab 3 task 4.6
You have a hub and spoke frame relay using physical interfaces.
The task states to use a different OSPF key for each spoke.
The solution guide states to configure both keys on the hub with different
key numbers however when I configure this only one spoke is able to
authenticate and the other spoke does not establish adjacency.
Here is the setup and solution:
R1
/
R3
\
R5
R1:
ip ospf message-digest-key 13 md5 CISCO13
R5:
ip ospf message-digest-key 35 md5 CISCO35
R3: ip ospf message-digest-key 13 md5 CISCO13
ip ospf message-digest-key 35 md5 CISCO35
As I said only one spoke comes up (I can't remember which and my rack time
is up).
Any ideas are appreciated.
This archive was generated by hypermail 2.1.4 : Sun Oct 01 2006 - 16:55:40 ART