From: Chris Broadway (midatlanticnet@gmail.com)
Date: Wed Sep 13 2006 - 20:56:50 ART
Group,
So If I have a task that says I have a Frame relay interface with a max
throughput of 512 kbps, would my CIR be 512000? I always assumed it would
be, but the lab I am looking at is confusing. Am I on crack?
-Broadway
On 9/13/06, Brian Dennis <bdennis@internetworkexpert.com> wrote:
>
> The terms are all relative meaning that they all could be the same
> value, they all could be different values, two could be the same value
> and the other could be different values, etc.
>
> HTH,
>
> Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
> bdennis@internetworkexpert.com
>
> Internetwork Expert, Inc.
> http://www.InternetworkExpert.com
> Toll Free: 877-224-8987
> Direct: 775-745-6404 (Outside the US and Canada)
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> midatlanticnet@gmail.com
> Sent: Wednesday, September 13, 2006 1:55 PM
> To: ccielab@groupstudy.com
> Subject: CIR/TARGET RATE/MAX THROUGHPUT
>
> Group,
>
> I am still on my venture to learn a little more QoS than I do now. I am
> under the impression CIR, target rate, and max through put are the same
> thing. But I am looking at something that gives me the impression they
> are different. Can someone verify for me?
>
> -Broadway
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Oct 01 2006 - 16:55:40 ART