From: Jojo jojo (barrerj1@hotmail.com)
Date: Wed Sep 13 2006 - 20:27:40 ART
You have to manually increase the queue sizes for the 3750's when using
AutoQos
hth
Jojo
>From: "Gavin Lawson" <GavinL@titan.net.au>
>Reply-To: "Gavin Lawson" <GavinL@titan.net.au>
>To: "Nick Davey" <nicky.davey@gmail.com>, "Cisco certification"
><ccielab@groupstudy.com>
>Subject: RE: Auto-QoS and Priority Queue
>Date: Wed, 13 Sep 2006 10:34:44 +0800
>
>There appears to be a bug is some IOS's where when Auto QoS is used, it
>doesn't create the "priority queue out" on the interface.
>
>I have seen this happen on 3750's and 3560's
>
>GL
>
>________________________________
>
>From: nobody@groupstudy.com on behalf of Nick Davey
>Sent: Wed 13/09/2006 10:24 AM
>To: Cisco certification
>Subject: Auto-QoS and Priority Queue
>
>
>
>Hi,
>
>On the 3750 when configuring auto-qos it seems that the "priority queue
>out"
>command is not configured and thus the expedite queue is disabled.
>
>Does this mean that the voice traffic will get poor service due to the low
>weight in the srr bandwidth configuration until the expedite queue is
>manually enabled?
>
>I notice on the 3550 the priority queue out command is configured via auto
>qos.
>
>Thanks.
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Oct 01 2006 - 16:55:40 ART