From: Aamir Aziz (aamiraz77@gmail.com)
Date: Sun Sep 03 2006 - 07:36:26 ART
Hi there ppl,
A friend of mine forwarded this task to me, i dont have a definite
answer so any replies are appreciated:
R1's serial interface 1/0 will be used for a customer network by
having two sub-interfaces. Apply Quality of Service to the
corresponding sub-interfaces. Customers ip address and bandwidth to be
allocated as following
1. 1/0.1 = 10.1.1.1/24 bandwidth 15%
2. 1/0.2 = 10.1.2.1/24 bandwidth 25%
3. critical voice traffic bandwidth 50%
R1 is a HUB already having a sub-interface s0/0.123 (FR-Multipoint)
connected to two spoke routers.
This is a possible solution, not sure:
ip access-list extended s0/0.1
permit ip any 10.1.1.0 0 0.0.0.255
ip access-list extended s0/0.2
permit ip any 10.1.2.0 2.0 0.0.0.255
ip access-list extended VOICE
permit udp any any range 16384 32767 precedence 5
class-map s0/0.1
match ip add s0/0.1
class-map s0/0.2
match ip add s0/0.2
class-map VOICE
match ip add VOICE
Policy-map s0/0.1
class s0/0.1
band percent 15
class VOICE
band percent 50
Policy-map s0/0.2
class s0/0.2
band percent 25
class VOICE
band percent 50
map-class frame-relay s0/0.1
service policy out s0/0.1
map-class frame-relay s0/0.2
service policy out s0/0.2
int s0/0
frame-relay traffic- shaping
max-reserved-band 90
int s0/0.1
class s0/0.1
int s0/0.2
class s0/0.2
Please ignore any syntax mistakes as i didnt get time to type it on
the router, but this logic does it make any sense for the above task??
Thanks
Aamir
This archive was generated by hypermail 2.1.4 : Sun Oct 01 2006 - 16:55:39 ART