From: Narbik Kocharians (narbikk@gmail.com)
Date: Sat Sep 02 2006 - 15:27:14 ART
Does that mean, if you pass the CCIE exam you are or you were not smart on
that day? Just a joke, please don't get excited.
On 9/1/06, sabrina pittarel <sabri_esame@yahoo.com> wrote:
>
> Brian,
> really well said, that's what really frustrates me about the lab.
> To know "PIMv2 = BSR", it's equivalent to be able to read into the test's
> author mind. PIM version 2 is the default protocol version and both the RP
> discovery protocols runs on it, so the version would be the last paramenter,
> in a real life scenario, that you would use to evaluate whether to run AUTO
> RP or BSR.
>
> Sometime they don't want you to solve the task, they want you to know what
> they mean when they use a given combination of words. And from where I come
> from that's mind reading.
>
> Thanks god there are group studies like this one that make you smart on
> those little things.
>
> Sorry for this little vent that is not beneficial for anybody except
> myself.
>
> Sabrina
>
> ----- Original Message ----
> From: Brian Dennis <bdennis@internetworkexpert.com>
> To: Jeff Ryan <jeffryanwn@hotmail.com>; ccielab@groupstudy.com
> Sent: Friday, September 1, 2006 3:59:10 PM
> Subject: RE: PIMv2
>
> Don't try to outthink the question. PIMv2 = BSR. People who outthink
> questions get a lot of $1250 lunches at Cisco ;-)
>
> The CCIE lab is one of the few places where being smart can be a liability
> and not an asset. This is because smart people are more likely to outthink
> a question, whereas "not so smart" people just answer the question in a
> straight forward manner because they can't outthink the question.
>
> HTH,
>
> Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
> bdennis@internetworkexpert.com
>
> Internetwork Expert, Inc.
> http://www.InternetworkExpert.com
> Toll Free: 877-224-8987
> Direct: 775-745-6404 (Outside the US and Canada)
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Jeff Ryan
> Sent: Friday, September 01, 2006 3:42 PM
> To: ccielab@groupstudy.com
> Subject: PIMv2
>
> If PIMv2 is ever mentioned in a task, should we use BSR or auto-rp?
>
> From the doc cd, it does reference BSR with v2. i.e. "PIM uses the BSR to
> discover and announce RP-set information for each group prefix to all the
> routers in a PIM domain. This is the same function performed by Auto-RP, but
> the BSR is part of the PIM Version 2 specification."
>
> Yet if you look at using auto-rp it will automatically default to pimv2 if
> all of the other routers agree as such i.e. cisco routers.
>
> Your thoughts?
>
> Thanks in advance,
> Jeff
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Narbik Kocharians CCIE# 12410 (R&S, SP, Security) CCSI# 30832 Network Learning, Inc. (CCIE class Instructor) www.ccbootcamp.com (CCIE Training)
This archive was generated by hypermail 2.1.4 : Sun Oct 01 2006 - 16:55:39 ART