From: sabrina pittarel (sabri_esame@yahoo.com)
Date: Sun Aug 27 2006 - 18:08:52 ART
Hi Victor,
did you solve this?
What wasn't working for you exactly?
On my router (running 12.4 smthg) I do see R3
filtering R2 and allowing all groups from R4
Sabrina
--- Victor Cappuccio <cvictor@protokolgroup.com>
wrote:
> Hi Ivan, thanks for taking a look at it.
> But I have it done at my lab, and Well it seems not
> to be working, maybe a
> little bug in the Version IOS (tm) C2600 Software
> (C2600-J1S3-M), Version
> 12.3(18), RELEASE SOFTWARE (fc3)
>
> I'm trying that later on another Router
> Thanks again
> Victor.-
>
>
>
> -----Mensaje original-----
> De: Ivan [mailto:ivan@iip.net]
> Enviado el: Lunes, 21 de Agosto de 2006 12:01 p.m.
> Para: ccielab@groupstudy.com; Victor Cappuccio
> Asunto: Re: ip pim rp-announce-filter
>
> 1) agree
> 2) Your configuration seems act like in example.
> ip access-list standard filtering-RP
> permit 50.0.0.2
> deny any
>
> permit 50.0.0.2 - means that R2 should subjected by
> filter.
> deny any - any other routers must "blindly" accept
> by MA, the same as deny
> R4
> in this case.
>
> ACL filternig-group strange for me.
> ip access-list standard filtering-group
> permit 224.1.0.1
> permit 224.1.0.2
> permit 224.1.0.3
> It permit all example-groups.
>
> Therefore MA filter R2 all group except
> 224.1.0.(1|2|3) and "blindly" accept
>
> all group from R4 (in example) and from any (in your
> case).
>
>
> If we want to reach the task we can simple delete
> ACL filtering-group. And
> ip access-list standard filtering-RP
> permit 50.0.0.4
> deny any
>
> > Hi Guys,
> >
> > I was playing around with the configuration showed
> in this link
> >
>
<http://www.cisco.com/en/US/tech/tk828/technologies_configuration_example09
> >1 86a00801cb923.shtml>
> >
>
http://www.cisco.com/en/US/tech/tk828/technologies_configuration_example091
> >8 6a00801cb923.shtml
> >
> > I have a couple of questions to do
> >
> > 1.- First R3 is missing the ip pim
> send-rp-discovery command right??
> > 2.- if I work with the ip pim rp-announce-filter
> rp-list filtering-RP
> > group-list filtering-group
> >
> > But instead of denying R4, I deny everything
> > Something like:
> >
> > ip access-list standard filtering-RP
> > permit 50.0.0.2
> > deny any
> >
> > It seem to not be working
> >
> > Any opinion about this
> > Thanks
> > Victor.-
> >
> >
>
This archive was generated by hypermail 2.1.4 : Fri Sep 01 2006 - 15:41:58 ART