ip pim rp-announce-filter

From: Victor Cappuccio (cvictor@protokolgroup.com)
Date: Mon Aug 21 2006 - 11:52:27 ART

Next message: Tim: "MPLS speed -- switching vs IP routing"
Previous message: Scott Morris: "RE: frame-relay fragment & exclude voice pakkets from being"
Next in thread: Ivan: "Re: ip pim rp-announce-filter"
Maybe reply: Ivan: "Re: ip pim rp-announce-filter"
Maybe reply: Victor Cappuccio: "RE: ip pim rp-announce-filter"
Maybe reply: sabrina pittarel: "RE: ip pim rp-announce-filter"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi Guys,

I was playing around with the configuration showed in this link
<http://www.cisco.com/en/US/tech/tk828/technologies_configuration_example091
86a00801cb923.shtml>
http://www.cisco.com/en/US/tech/tk828/technologies_configuration_example0918
6a00801cb923.shtml

I have a couple of questions to do

1.- First R3 is missing the ip pim send-rp-discovery command right??
2.- if I work with the ip pim rp-announce-filter rp-list filtering-RP
group-list filtering-group

But instead of denying R4, I deny everything
Something like:

ip access-list standard filtering-RP
permit 50.0.0.2
deny any

It seem to not be working

Any opinion about this
Thanks
Victor.-

Next message: Tim: "MPLS speed -- switching vs IP routing"
Previous message: Scott Morris: "RE: frame-relay fragment & exclude voice pakkets from being"
Next in thread: Ivan: "Re: ip pim rp-announce-filter"
Maybe reply: Ivan: "Re: ip pim rp-announce-filter"
Maybe reply: Victor Cappuccio: "RE: ip pim rp-announce-filter"
Maybe reply: sabrina pittarel: "RE: ip pim rp-announce-filter"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Sep 01 2006 - 15:41:58 ART