From: Scott Morris (swm@emanon.com)
Date: Sat Aug 26 2006 - 02:38:58 ART
If you placed a service-policy on a frame-relay interface the was running
PPPoFR, then the only type of traffic that would exist at that physical
interface would be PPP stuff, not tcp, udp, etc.
So that wouldn't help you much!
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, JNCIE
#153, CISSP, et al.
CCSI/JNCI-M/JNCI-J
IPExpert VP - Curriculum Development
IPExpert Sr. Technical Instructor
smorris@ipexpert.com
http://www.ipexpert.com
_____
From: James Nendel [mailto:james.nendel@gmail.com]
Sent: Saturday, August 26, 2006 1:31 AM
To: swm@emanon.com
Cc: ccielab@groupstudy.com
Subject: Re: QoS -- SCOTT or the BRIANS
Is this concept is the same for main frame-relay interfaces using
virtual-templates ?
Thanks you are the Man!!
On 8/26/06, Scott Morris <swm@emanon.com > wrote:
You don't. At least not for queuing. Being a completely virtual interface,
there aren't any queues associated with them, and the concept of things
tearing down and setting up frequently would wreak havoc with the router's
memory management! (Remember that virtual-templates and stuff started in
the dialer world, so you get to inherit the bad things too!)
Check out:
http://www.cisco.com/warp/public/105/pppoe_qos_dsl.html
Yes, it has to do with DSL modems and stuff, but it explains a bit about the
concepts and restrictions, but also alludes to some different logic you may
be able to use with your other interfaces to achieve what you want.
If you search google for 'virtual-template service-policy' you may find some
e-mail discussions on the cisco-nsp list from puck essentially going over
the same thing.
HTH,
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, JNCIE
#153, CISSP, et al.
CCSI/JNCI-M/JNCI-J
IPExpert VP - Curriculum Development
IPExpert Sr. Technical Instructor
smorris@ipexpert.com
http://www.ipexpert.com <http://www.ipexpert.com>
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
James Nendel
Sent: Saturday, August 26, 2006 1:04 AM
To: ccielab@groupstudy.com
Subject: QoS -- SCOTT or the BRIANS
Hi,
How do I enable CBWFQ in a Frame-relay p2p subinterface that is using a
virtual-template ?
config-if)#service-policy out DEFAULT
Class Based Weighted Fair Queueing will be applied only to the
Virtual-Access interfaces associated with an MLP bundle.
#show policy-map interface virtual-template 1
Virtual-Template1
Service-policy output: DEFAULT
Service policy content is displayed only for cloned interfaces only such
as vaccess and sessions
Please help
Thx
James
This archive was generated by hypermail 2.1.4 : Fri Sep 01 2006 - 15:41:58 ART