From: Bizzell, Keith (keith.bizzell@eds.com)
Date: Sat Aug 12 2006 - 20:49:20 ART
Resending...forgot to add the subject line. Sorry.
> _____________________________________________
>
>
> I'm trying to configure class c so I can set a link threshold for my
> MFR interface. According to the DocCD, the interface command is as
> follows:
>
> Frame-relay multilink bandwidth-class [a|b|c[threshold]]
>
> But from my router, that's not an option:
>
> R6(config)#do show fram multilink
> Bundle: MFR1, State = up, class = A, fragmentation disabled
> BID = MFR1
> Bundle links:
> Serial0/1/1, HW state = up, link state = Up, LID = Serial0/1/1
> Serial0/1/0, HW state = up, link state = Up, LID = Serial0/1
>
> R6(config)#int mfr1
> R6(config-if)#frame-relay multilink ?
> bid Bundle id for this bundle interface
> output-threshold Set output-threshold as xmt credit on one bundle
> link
>
> What gives? I want set it up where both links must be active for the
> MFR1 interface to stay up.
>
> Thanks,
> Keith Bizzell
This archive was generated by hypermail 2.1.4 : Fri Sep 01 2006 - 15:41:57 ART