From: Bizzell, Keith (keith.bizzell@eds.com)
Date: Sat Aug 12 2006 - 20:47:46 ART
I'm trying to configure class c so I can set a link threshold for my MFR
interface. According to the DocCD, the interface command is as follows:
Frame-relay multilink bandwidth-class [a|b|c[threshold]]
But from my router, that's not an option:
R6(config)#do show fram multilink
Bundle: MFR1, State = up, class = A, fragmentation disabled
BID = MFR1
Bundle links:
Serial0/1/1, HW state = up, link state = Up, LID = Serial0/1/1
Serial0/1/0, HW state = up, link state = Up, LID = Serial0/1
R6(config)#int mfr1
R6(config-if)#frame-relay multilink ?
bid Bundle id for this bundle interface
output-threshold Set output-threshold as xmt credit on one bundle link
What gives? I want set it up where both links must be active for the MFR1
interface to stay up.
Thanks,
Keith Bizzell
This archive was generated by hypermail 2.1.4 : Fri Sep 01 2006 - 15:41:57 ART