Re: IEWB v3v1 lab 7 task 4.2 Rip filtering

From: Radoslav Vasilev (deckland@gmail.com)
Date: Wed Aug 02 2006 - 10:03:03 ART

• Next message: Kae Hsu: "Re: OT: rate-limit on GSR"
• Previous message: Vincent Mashburn: "RE: ODR and Loopback interfaces"
• Maybe in reply to: tonynguyenchi: "IEWB v3v1 lab 7 task 4.2 Rip filtering"
• Next in thread: Bajo: "Re: IEWB v3v1 lab 7 task 4.2 Rip filtering"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

filters any route received on that iface - do no use that iface for
forwarding traffic.

On 8/2/06, tonynguyenchi <tonynguyenchi.ccie@gmail.com> wrote:
>
> Dear Group,
>
> In this section, I am not clear about the command:
>
> distribute-list 1 in Virtual-Template1
> access-list 1 deny any
>
>
> router rip
> version 2
> network 54.0.0.0
> network 150.1.0.0
> network 163.1.0.0
> network 204.12.1.0
> distribute-list prefix RIP out FastEthernet0/1
> distribute-list 1 in Virtual-Template1
> distribute-list gateway R2 in
> no auto-summary
> !
> ip classless
> !
> !
> ip http server
> no ip http secure-server
> !
> !
> ip prefix-list R2 seq 5 permit 204.12.1.2/32
> !
> ip prefix-list RIP seq 5 permit 163.1.6.0/24
> ip prefix-list RIP seq 10 permit 150.1.6.0/24
> access-list 1 deny any
>
> Anybody can explain.
>
> Thanks and best regards,
>
> Tony
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

• Next message: Kae Hsu: "Re: OT: rate-limit on GSR"
• Previous message: Vincent Mashburn: "RE: ODR and Loopback interfaces"
• Maybe in reply to: tonynguyenchi: "IEWB v3v1 lab 7 task 4.2 Rip filtering"
• Next in thread: Bajo: "Re: IEWB v3v1 lab 7 task 4.2 Rip filtering"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Sep 01 2006 - 15:41:55 ART