From: Vincent Mashburn (vmashburn@fedex.com)
Date: Thu Aug 03 2006 - 15:12:05 ART
I think I isolated it to a IOS bug in 12.4(8). I backed it down to an
earlier version and everything works fine.
Thanks
Vince Mashburn
Voice / Data Engineer
901-263-5072
CCVP, CCNP, CCDA,Network +
Cisco IP Telephony Support Specialist
Cisco IP Telephony Operations Specialist
-----Original Message-----
From: Victor Cappuccio [mailto:cvictor@protokolgroup.com]
Sent: Thursday, August 03, 2006 12:24 PM
To: Vincent Mashburn; ccielab@groupstudy.com
Subject: RE: ODR and Loopback interfaces
You mind to share your topology and Config
Thanks
Victor.-
-----Mensaje original-----
De: nobody@groupstudy.com [mailto:nobody@groupstudy.com] En nombre de
Vincent Mashburn
Enviado el: Lunes, 31 de Julio de 2006 12:54 p.m.
Para: ccielab@groupstudy.com
Asunto: ODR and Loopback interfaces
I am running ODR in my lab between 2 routers. The hub router is
configured with "router ODR" and the spoke router has IP routing
disabled. I also have a loopback interface configured on the router.
The problem that I am having is that as long as the loopback interface
is up, the router tries to route all packets via the loopback. However,
when I shut the loopback, all routing works as expected. From running
debugs, it looks like the RIB is automatically forwarding all packets to
any available loopback address first. Does anyone know how I can stop
this while still keeping the loopback active?
Thanks
Vince Mashburn
Voice / Data Engineer
901-263-5072
CCVP, CCNP, CCDA,Network +
Cisco IP Telephony Support Specialist
Cisco IP Telephony Operations Specialist
This archive was generated by hypermail 2.1.4 : Fri Sep 01 2006 - 15:41:55 ART