From: Victor Cappuccio (cvictor@protokolgroup.com)
Date: Wed Aug 02 2006 - 22:00:23 ART
Hi Paul,
If my understanding of your email is ok, Please Try it again, but with
control part of the SLA in disable.
Something like:
type udpEcho dest-ipaddr 1.1.1.1 dest-port 32 control disable
Saludos,
Victor.-
-----Mensaje original-----
De: nobody@groupstudy.com [mailto:nobody@groupstudy.com] En nombre de Paul
Dardinski
Enviado el: Miircoles, 02 de Agosto de 2006 08:35 p.m.
Para: Cisco certification
Asunto: Multicast helper-map testing
All,
Trying to use sla for validation of mcast helper-map configuration. My
problem is generation of the correct port. No matter how I configure the
sla (see below), it seems to always default to port 1967. Is there some
way to override this behavior?
SLA:
ip sla monitor 1
type udpEcho dest-ipaddr 255.255.255.255 dest-port 5000
timeout 3
frequency 1
ip sla monitor schedule 1 life forever start-time now
DEBUG (next-hop):
*Mar 2 03:39:20.945: IP: s=112.10.1.1 (FastEthernet0/0.10),
d=255.255.255.255,
len 80, rcvd 2
*Mar 2 03:39:20.945: UDP src=57310, dst=1967
I have tried stopping/starting, attempting to manually enter dest-port
inside the sla (gets ignored as already in the type). Would like to be
able to use any port so wouldn't have to go back and play with it for
the lab.
Thanks in advance,
Paul
This archive was generated by hypermail 2.1.4 : Fri Sep 01 2006 - 15:41:55 ART