From: Ivan (ivan@iip.net)
Date: Thu Aug 03 2006 - 06:10:50 ART
This port used IP SLA for control responder. Try to turn off control
responder.
Also enable ip directed-broadcast on outgoing interface.
> All,
>
>
>
> Trying to use sla for validation of mcast helper-map configuration. My
> problem is generation of the correct port. No matter how I configure the
> sla (see below), it seems to always default to port 1967. Is there some
> way to override this behavior?
>
>
>
> SLA:
>
>
>
> ip sla monitor 1
>
> type udpEcho dest-ipaddr 255.255.255.255 dest-port 5000
>
> timeout 3
>
> frequency 1
>
> ip sla monitor schedule 1 life forever start-time now
>
>
>
> DEBUG (next-hop):
>
> *Mar 2 03:39:20.945: IP: s=112.10.1.1 (FastEthernet0/0.10),
> d=255.255.255.255,
>
> len 80, rcvd 2
>
> *Mar 2 03:39:20.945: UDP src=57310, dst=1967
>
>
>
> I have tried stopping/starting, attempting to manually enter dest-port
> inside the sla (gets ignored as already in the type). Would like to be
> able to use any port so wouldn't have to go back and play with it for
> the lab.
>
>
>
> Thanks in advance,
>
> Paul
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
-- Ivan
This archive was generated by hypermail 2.1.4 : Fri Sep 01 2006 - 15:41:55 ART