From: David Redfern \(AU\) (David.Redfern@didata.com.au)
Date: Sun Jul 23 2006 - 19:21:56 ART
If you are getting the error
CBWFQ : Not supported on subinterfaces
Try nesting service policies
Create a service policy with only the class default class.
Apply a shaping value and nest your service policy on the class default
class's shaping queue.
Policy-map CONGESTION_MANAGEMENT
Class RTP
Priority percent 10
Class INTERACTIVE
Bandwidth percent 30
Policy-map SHAPE
Class class-default
Shape average 1000000
Service-policy CONGESTION_MANAGEMENT
Then apply the SHAPE policy map on the subinterface
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Jens Petter
Sent: Monday, 24 July 2006 2:44 AM
To: ccielab@groupstudy.com
Subject: CBWFQ on subinterfaces
Hi all,
A quick Q. I was trying to implement CBWFQ on a 3640 12.1 (something)
platform using fastethernet subinterfaces. I got an error message that
this was not supported.. Is this supported on later images on a 7206
platform.
Like this :
Policy-map CONGESTION_MANAGEMENT
Class RTP
Priority percent 10
Class INTERACTIVE
Bandwith percent 30
Interface g2/0
No ip adddress
Interface g2/0.1
Encapsulation dot1Q 100
Service-policy output CONGESTION_MANAGEMENT
Cisco IOS Software, 7200 Software (C7200-IS-M), Version 12.3(11)T2,
RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2004 by Cisco Systems, Inc.
Compiled Fri 29-Oct-04 12:47 by cmong
ROM: System Bootstrap, Version 12.3(4r)T1, RELEASE SOFTWARE (fc1)
BOOTLDR: 7200 Software (C7200-KBOOT-M), Version 12.2(4)BW, EARLY
DEPLOYMENT RELEASE SOFTWARE (fc1)
Cisco 7206VXR (NPE-G1) processor (revision A) with 229376K/32768K bytes
of memory.
Processor board ID 25855125
SB-1 CPU at 700MHz, Implementation 1025, Rev 0.2, 512KB L2 Cache
6 slot VXR midplane, Version 2.6
Jens
This archive was generated by hypermail 2.1.4 : Tue Aug 01 2006 - 07:13:48 ART