From: Jens Petter (jenseike@start.no)
Date: Sun Jul 23 2006 - 13:43:39 ART
Hi all,
A quick Q. I was trying to implement CBWFQ on a 3640 12.1 (something)
platform using fastethernet subinterfaces. I got an error message that this
was not supported.. Is this supported on later images on a 7206 platform.
Like this :
Policy-map CONGESTION_MANAGEMENT
Class RTP
Priority percent 10
Class INTERACTIVE
Bandwith percent 30
Interface g2/0
No ip adddress
Interface g2/0.1
Encapsulation dot1Q 100
Service-policy output CONGESTION_MANAGEMENT
Cisco IOS Software, 7200 Software (C7200-IS-M), Version 12.3(11)T2, RELEASE
SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2004 by Cisco Systems, Inc.
Compiled Fri 29-Oct-04 12:47 by cmong
ROM: System Bootstrap, Version 12.3(4r)T1, RELEASE SOFTWARE (fc1)
BOOTLDR: 7200 Software (C7200-KBOOT-M), Version 12.2(4)BW, EARLY DEPLOYMENT
RELEASE SOFTWARE (fc1)
Cisco 7206VXR (NPE-G1) processor (revision A) with 229376K/32768K bytes of
memory.
Processor board ID 25855125
SB-1 CPU at 700MHz, Implementation 1025, Rev 0.2, 512KB L2 Cache
6 slot VXR midplane, Version 2.6
Jens
This archive was generated by hypermail 2.1.4 : Tue Aug 01 2006 - 07:13:48 ART