From: Hafizur Rahman \(UK\) (hafizur.rahman@uk.didata.com)
Date: Tue Jul 18 2006 - 05:50:05 ART
Thanks scott and workerbee for your advise on this
-----Original Message-----
From: Scott Morris [mailto:swm@emanon.com]
Sent: 17 July 2006 15:04
To: Hafizur Rahman (UK); ccielab@groupstudy.com
Subject: RE: RIP protocol small but confusing
Why not use distribute-lists? Either inbound or outbound....
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cr/hi
rp_r
/rte_pih.htm#wp1122527
HTH,
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713,
JNCIE
#153, CISSP, et al.
CCSI/JNCI-M/JNCI-J
smorris@ipexpert.com
http://www.ipexpert.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Hafizur Rahman (UK)
Sent: Monday, July 17, 2006 9:53 AM
To: ccielab@groupstudy.com
Subject: RE: RIP protocol small but confusing
Thank for every ones reply
So I take it there is no way I can prevent RIP to advertise all 4
interfaces
ip address to its neighbor. Right?
Thanks
Hafi
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Hafizur Rahman (UK)
Sent: 17 July 2006 13:00
To: ccielab@groupstudy.com
Subject: RIP protocol small but confusing
Hi
I am trying to understand RIP well.
I have got a router
which has got 4 interface all are running major network 20.20.0.0. Now I
want to enable RIP only on 2 interfaces.
How can I accomplish this?
I know with Passive-interface it will not send out update but will
receive
update.
Router rip
Ver 2
No au
Netw 20.0.0.0
Whit this config it is sending out all 4 interfaces to other routers.
Any help
Thanks in advance
Hafi
Sheikh
Rahman
Support Engineer
Dimension Data United Kingdom
Dimension Data
House
Building 2 , Waterfront Business Park
Hampshire GU51 3QT
+44 12
5277 9330 Office
+44 12 5277 9010 Fax
hafizur.rahman@uk.didata.com
For
further information about Dimension Data, please go to
www.dimensiondata.com
-----------------------------------------
Dimension Data - providing global
IP based solutions and services
for over 20 years supported locally from a
single point of contact
This email is confidential. If you are not the
intended recipient
then you must not copy it, forward it, use it for any
purpose, or
disclose it to another person.
Please also note that the
author of this email is not authorised
to; make any offers capable of
acceptance unless expressly stated
in a validly dated and attached document
which shall be subject to
the terms and conditions stated therein or,
conclude any contract
on behalf of Dimension Data by email.
Although
Dimension Data has taken reasonable precautions to ensure
no viruses are
present in this email, the company cannot accept
responsibility for any loss
or damage arising from the use of this
email or attachments.
This archive was generated by hypermail 2.1.4 : Tue Aug 01 2006 - 07:13:47 ART