From: WorkerBee (ciscobee@gmail.com)
Date: Tue Jul 18 2006 - 05:25:17 ART
In the distribute-list, specify the interfaces you do not wish to
receive update.
access-list 1 deny 0.0.0.0 255.255.255.255
router rip
network 20.20.0.0
!-- prevent router from receiving over F0/0-1
distribute-list 1 in F0/0
distribute-list 1 in F0/1
On 7/17/06, Scott Morris <swm@emanon.com> wrote:
> Why not use distribute-lists? Either inbound or outbound....
>
> http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cr/hirp_r
> /rte_pih.htm#wp1122527
>
> HTH,
>
>
> Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, JNCIE
> #153, CISSP, et al.
> CCSI/JNCI-M/JNCI-J
> smorris@ipexpert.com
> http://www.ipexpert.com
>
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Hafizur Rahman (UK)
> Sent: Monday, July 17, 2006 9:53 AM
> To: ccielab@groupstudy.com
> Subject: RE: RIP protocol small but confusing
>
> Thank for every ones reply
>
> So I take it there is no way I can prevent RIP to advertise all 4 interfaces
> ip address to its neighbor. Right?
>
> Thanks
>
> Hafi
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Hafizur Rahman (UK)
> Sent: 17 July 2006 13:00
> To: ccielab@groupstudy.com
> Subject: RIP protocol small but confusing
>
> Hi
>
>
>
> I am trying to understand RIP well.
>
>
>
> I have got a router
> which has got 4 interface all are running major network 20.20.0.0. Now I
> want to enable RIP only on 2 interfaces.
>
>
>
> How can I accomplish this?
> I know with Passive-interface it will not send out update but will receive
> update.
>
>
>
> Router rip
>
> Ver 2
>
> No au
>
> Netw 20.0.0.0
> Whit this config it is sending out all 4 interfaces to other routers.
> Any help
>
>
>
> Thanks in advance
>
>
>
> Hafi
>
>
>
>
> Sheikh
> Rahman
> Support Engineer
> Dimension Data United Kingdom
> Dimension Data
> House
> Building 2 , Waterfront Business Park
> Hampshire GU51 3QT
> +44 12
> 5277 9330 Office
> +44 12 5277 9010 Fax
> hafizur.rahman@uk.didata.com
>
> For
> further information about Dimension Data, please go to
> www.dimensiondata.com
> -----------------------------------------
> Dimension Data - providing global
> IP based solutions and services
> for over 20 years supported locally from a
> single point of contact
>
> This email is confidential. If you are not the
> intended recipient
> then you must not copy it, forward it, use it for any
> purpose, or
> disclose it to another person.
>
> Please also note that the
> author of this email is not authorised
> to; make any offers capable of
> acceptance unless expressly stated
> in a validly dated and attached document
> which shall be subject to
> the terms and conditions stated therein or,
> conclude any contract
> on behalf of Dimension Data by email.
>
> Although
> Dimension Data has taken reasonable precautions to ensure
> no viruses are
> present in this email, the company cannot accept
> responsibility for any loss
> or damage arising from the use of this
> email or attachments.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Aug 01 2006 - 07:13:47 ART