From: Scott Morris (swm@emanon.com)
Date: Sun Jul 16 2006 - 15:47:45 ART
I think you would read what your lab tells you to do and program it
accordingly. If you know what it is that those interface commands are
accomplishing, I think it would make no difference then! As long as things
work, and you haven't violated any restrictions, then you are good to go!
Show ip protocols will help summarize how things normally operate if ever in
doubt!
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, JNCIE
#153, CISSP, et al.
CCSI/JNCI-M/JNCI-J
smorris@ipexpert.com
http://www.ipexpert.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Magmax
Sent: Sunday, July 16, 2006 4:43 AM
To: ccielab@groupstudy.com
Subject: Some Questions
Guys,
I just started my ccie studies a month after failing my 2nd attempt. Here
are few questions if anyone can help
RIP
Q.If question ask you to enable RIP v2 which is correct config.In my mind
both should be ok for proctors
router rip
version 2
no auto-summary
passive-interface default
no passive-interface Ethernet 0/0
network 10.0.0.0
OR
router rip
version 2
no auto-summary
passive-interface default
no passive-interface Ethernet 0/0
network 10.0.0.0
Interface FastEthernet 0/0
Ip rip send version 2
Ip rip receive version 2
Regards,
Ubaid
This archive was generated by hypermail 2.1.4 : Tue Aug 01 2006 - 07:13:47 ART