From: chris (iannaconec@optonline.net)
Date: Fri Jul 07 2006 - 15:26:00 ART
that command has an ip value of 0.0.0.0 for all dlcis - i have
another ip set on the interfaces
whats going on? this is Internetwork Expert technologies first
frame-relay lab , in case you need a topology - I assume as an author
you would have access to the map.
At 02:17 PM 7/7/2006, you wrote:
>Look at the "show frame-relay map" output. You need to make sure that
>layer 3 to layer 2 resolution is being performed properly via Frame
>Relay Inverse-ARP. As an alternative you can use the static
>"frame-relay map" statement or use a point-to-point subinterface.
>
>
>HTH,
>
>Brian McGahan, CCIE #8593
>bmcgahan@internetworkexpert.com
>
>Internetwork Expert, Inc.
>http://www.InternetworkExpert.com
>Toll Free: 877-224-8987 x 705
>Outside US: 775-826-4344 x 705
>24/7 Support: http://forum.internetworkexpert.com
>Live Chat: http://www.internetworkexpert.com/chat/
>
>
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
>Of
> > chris
> > Sent: Friday, July 07, 2006 1:10 PM
> > To: ccielab@groupstudy.com
> > Subject: help
> >
> > i am trying a point-to-point fr like between two routers
> >
><http://pastebin.ca/81619>http<http://pastebin.ca/81619>://pastebin.ca/8
>16
> > 19
> > what am i dont wrong - is this a hardware issue
> >
> >
>_______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Aug 01 2006 - 07:13:47 ART